Brand Story

中文版   Contact Us   Site Map     


   Power over Ethernet

   PoE/PoE+ Module Solutions

   Press Release


    > PoE Modules

        PoE PD Module

        PoE PSE Module

    > PoE+Modules

        PoE+ PD Module

        PoE+ PSE Module

   PoE/PoE+ Module Applications



Befact Home > PoE/PoE+ Module Application Note  > PoE/PoE+ PD Modules – Load Input Filter Design II


PoE/PoE+ Module Application Note


PoE PD Modules – Load Input Filter Design II


A. Scope
This document can be applied on Befact PoE / PoE+ PD modules. Current models of Befact PoE/PoE+ PD modules are TPD modules (TPD-12, TPD-50, TPD-33), SPD modules (SPD-12, SPD-50), THPD modules (THPD-12, THPD-50, THPD-33), AHPD Module (AHPD-12).

B. Case Study – PI ( π ) Filter
A proper input filter can do noise reduction, impedance tuning, EMI reduction and enhancing stability of circuitry for a load, target system. One of the popular filters, PI ( π ) filter, is another simple one can be applied on target system. Normally, the ferrite bead is the recommended one for the “L” part. And the “C” part can be one of all kinds of capacitor, for example, electrolytic capacitor (EC), Multi-Layer Ceramic Capacitor (MLCC), solid capacitor,…etc.



PoE/PoE+ PD Modules – Load Input Filter Design II

Befact Technologies Co., Ltd.
Since Dec., 2005

6F-1, No. 157, Wu-Ling Rd., Hsinchu City, Taiwan, R.O.C.
TEL:03-5327068      FAX:03-5327626
Copyright 2011 Befact Technologies Co., Ltd. All Rights Reserved.